How to solve the problem of adhesion between colored full resin carbon tape and printing media?

The problem of adhesion between colored full resin carbon tape and printing media may be caused by various factors. Here are some effective solutions:

1、 Adjust printer settings

Reduce print head temperature:

Excessive temperature of the print head may cause the resin material on the carbon ribbon to overheat, making it easier to adhere to the printing medium.

Try lowering the temperature setting of the printer and observe if it helps reduce adhesion.

Adjust printing pressure:

Excessive printing pressure may also cause adhesion between the carbon ribbon and the printing medium.

Adjust the pressure setting of the print head appropriately according to the printer model and manual.

2、 Check and replace the carbon ribbon

Ensure the quality of carbon ribbon:

Use reliable quality carbon tape and avoid using inferior or expired carbon tape.

Poor quality carbon ribbon may contain excessive impurities or uneven resin composition, which can easily lead to adhesion.

Choose the appropriate type of carbon ribbon:

Select the appropriate carbon ribbon type based on the requirements of the printing medium and printer.

For example, for certain special printing media, it may be necessary to use carbon tapes with special coatings to reduce adhesion.

3、 Optimize printing media

Choose the appropriate printing medium:

Ensure that the printing medium used is compatible with the carbon ribbon.

Some printing media may be more prone to sticking to carbon tape, so choosing the appropriate medium is crucial.

Processing the surface of printing media:

If the surface of the printing medium is too smooth or contains contaminants such as grease, it may cause the carbon ribbon to adhere to it.

Before printing, you can try to pre treat the printing medium, such as cleaning the surface or applying a thin layer of primer to increase its roughness and adhesion.

4、 Adjust the working environment of the printer

Control temperature and humidity:

The high temperature and humidity in the working environment of the printer may also cause the carbon ribbon to adhere to the printing medium.

Try to keep the temperature and humidity of the printer's working environment within an appropriate range, such as turning on air conditioning or dehumidifiers.

Avoid dust and pollutants:

Ensure that the working environment of the printer is clean, avoiding dust and pollutants from entering the interior of the printer or adhering to the carbon ribbon and printing media.

5、 Regular maintenance and upkeep of the printer

Clean the print head:

Regularly clean the print head to ensure its surface is clean and free of stains.

Use a suitable cleaning cloth or cotton swab dipped in a small amount of alcohol or specialized cleaning agent for cleaning.

Check and replace printer components:

Regularly check the condition of printer rollers, tension wheels, cardboard and other components.

If damage or severe wear is found, it should be replaced promptly to ensure the normal operation of the printer.

In summary, solving the problem of adhesion between colored full resin carbon tape and printing media requires investigation and adjustment from multiple aspects. By adjusting printer settings, checking and replacing ribbon, optimizing printing media, adjusting printer working environment, and regularly maintaining and servicing the printer, the occurrence of adhesion can be effectively reduced, and printing quality and efficiency can be improved.