How to print PET matte silver sticker label?

The process of printing PET matte silver self-adhesive labels usually involves specific printing techniques and material selection. Here are some key steps and considerations:

1. Choose the right printer

For the printing of PET dumb silver self-adhesive labels, it is recommended to choose a printer that supports the principle of thermal transfer, such as Shuofang barcode printer BP108. This type of printer can transfer the ink on the carbon belt to the label paper through thermal transfer technology to form a clear graphic effect. At the same time, these printers are often equipped with high-precision print heads that ensure print quality.

2. Prepare printing materials

Label paper: Make sure to use PET matte silver self-adhesive label paper. This material has the characteristics of high temperature resistance, chemical corrosion resistance, water and oil resistance, which is very suitable for applications requiring high durability.

Carbon tape: Due to the characteristics of PET matte silver self-adhesive labels, ordinary carbon tape may not meet the printing needs. Therefore, resin based carbon tape should be selected for printing. Resin based carbon strip has the characteristics of heat resistance, solvent resistance and scratch resistance, which is very suitable for printing polymer materials such as PET.

3. Adjust the printer Settings

Adjust various printer Settings, such as printing speed, printing concentration, and paper type, according to printing requirements and label paper specifications. Make sure the printer Settings match the printing material for the best print results.

4. Design and import the print content

Use professional label design software or editing software to design the graphic content that needs to be printed. Once the design is complete, import the content into the printer. If the printer supports network printing or mobile printing, the printed content can also be transmitted wirelessly.

5. Start printing

Verify that the printer is properly installed with carbon tape and label paper, and that all Settings are adjusted. Then start the printer and begin the printing process. In the printing process, pay attention to the printing effect to ensure that the text is clear, no broken lines or fuzzy phenomenon.

6. Inspect and dispose of finished products

After the printing is completed, check the printing quality of the finished label in time. If any problems are found (such as print offset, color inequality), the printer Settings should be adjusted in time or the printing material should be replaced. At the same time, the necessary cutting and finishing work of the finished product label is carried out for subsequent use.

Matters needing attention

During the printing process, keep the printer and printing environment clean and dry to avoid the impact of dust and moisture on the print quality.

Clean the printer's printhead and drum components regularly to extend the service life of the printer and maintain print quality.

When storing PET matte silver self-adhesive labels, pay attention to avoid adverse factors such as high temperature, humidity and direct sunlight, so as not to cause damage to the label.

To sum up, printing PET matte silver self-adhesive labels requires selecting the right printer and material, and carefully adjusting the printer Settings and printing content. By following the above steps and precautions, you can obtain high-quality printing results.