How to properly store and enhance wax based carbon ribbon to ensure its performance?

To ensure the enhanced performance of wax based carbon ribbon, it is necessary to adopt the correct storage method. Here are some key storage recommendations:

1. Temperature control:

The storage environment should be maintained between -5 ℃ and 40 ℃. This is because the chemical composition and physical structure of carbon ribbon may be affected by temperature changes, thereby affecting its printing performance.

2. Humidity management:

The relative humidity should be controlled between 20% and 85%. Excessive humidity may cause the carbon ribbon to become damp, affecting its printing quality and durability; Low humidity may cause the carbon ribbon to become too dry, resulting in poor printing performance.

3. Storage period:

Under the above temperature and humidity conditions, the storage time of carbon ribbon should not exceed one year. Long term storage may lead to a decrease in carbon ribbon performance, so it is recommended to purchase on demand to avoid long-term inventory.

4. Avoid direct exposure:

Carbon ribbon should be stored in a dry, cool place, away from direct sunlight and high temperature environments. Direct sunlight and high temperature can accelerate the aging process of carbon ribbon, reducing its service life.

5. Prevent compression and moisture:

During storage, the carbon ribbon should be protected from compression or moisture. Squeezing may cause deformation or damage to the carbon ribbon, while moisture can affect its printing effect. Therefore, it is recommended to use a dedicated carbon ribbon storage box or bag and ensure a dry and ventilated storage environment.

6. Regular inspection:

Regularly inspect the stored carbon ribbon to ensure that its packaging is intact and free from signs of moisture or deformation. If any problems are found, they should be dealt with or replaced in a timely manner.

In summary, the correct storage method is the key to ensuring enhanced performance of wax based carbon ribbons. By controlling the temperature and humidity of the storage environment, avoiding direct exposure and squeezing of moisture, and conducting regular inspections, the service life of carbon ribbons can be effectively extended and their good printing performance can be maintained.