How to set sensor type for TSC barcode printer

The method of setting the sensor type of TSC barcode printer mainly depends on the specific model of printer and the software interface used. In general, it can be set up through the button operation on the printer control panel or through the printer setup software on the connected computer. Here are some general steps and suggestions:

1, through the printer control panel Settings (for some models)

Find sensor Settings options:

First, make sure the printer is connected to a power source and turned on.

Depending on the printer model, you may need to access the setup screen through the MENU key on the printer panel.

In the Settings screen, look for options related to the sensor, which are usually under menus such as Settings, Service, or Printer Defaults.

Select sensor type:

In the Sensor Settings options, you will see different Sensor types to choose from, such as Gap Sensor, Black Mark Sensor, etc.

Depending on the type of label paper you are using (such as spacing paper, black label paper, or continuous paper), select the appropriate sensor type.

Save Settings:

When the Settings are complete, make sure to save the changes and exit the Settings screen.

2. Set the software Settings through the printer on the computer (such as BarTender, LabelShop, etc.)

Open the printer setup software:

Install and open the printer setup software of your choice (BarTender, LabelShop, etc.) on your computer.

Select the printer and format the label:

Select the TSC barcode printer driver model that has been installed in the software.

Set the label format as required, including the label width, height, and spacing.

Set sensor type:

In label formatting or printer properties Settings, look for options related to the sensor.

Select the correct sensor type based on the actual type of label paper. Note that some software may directly associate the sensor type with the label paper type, so it is simply a matter of choosing the correct label paper type.

Save and print the test:

Save your Settings and run a print test to make sure everything works.

Third, precautions

Consult the instructions: Different models of TSC barcode printers may have different setting methods and steps. Therefore, it is recommended to consult the printer's user manual or online support documentation for more specific guidance.

Initialize the printer: If there is confusion or error during the setup process, you can try initializing the printer to restore the default Settings. The initialization method may vary depending on the printer model and usually involves holding down a specific combination of buttons and turning it on.

Contact Technical Support: If you are having trouble setting up or are unsure how to do it, you can contact TSC's technical support team for help.

Please note that due to the variety of printer models and software versions, the above steps may need to be adjusted according to the actual situation.