What carbon tape is needed for TSC barcode printer to print self-adhesive label paper

When TSC bar code printers print self-adhesive coated paper, they usually need to be equipped with a suitable carbon belt to ensure the printing effect. The choice of carbon strip mainly depends on the printing requirements, printing material and the desired printing effect. Here are some suggestions on how to choose carbon strips for TSC barcode printers:

1. Carbon belt type

Wax Ribbon (Wax Ribbon)

Features: low cost, general printing effect, suitable for printing labels with low clarity requirements.

Application scenario: Common paper labels, coated paper labels, etc.

For self-adhesive coated paper: Although it can be used, it may not be effective in some occasions that require higher clarity and wear resistance.

Wax/Resin Ribbon

Features: Combined with the advantages of wax and resin based carbon strip, the printing effect is between the two, and the wear resistance is good.

Application scenario: Widely used in a variety of material labels, including self-adhesive coated paper.

For self-adhesive coated paper: it is a better choice, which can provide clear and relatively wear-resistant printing effect.

Multifunctional resin-based carbon strip Multifunctional resin-based carbon strip

Features: High cost, excellent printing effect, wear resistance, scratch resistance, solvent resistance, high temperature resistance.

Application scenario: Printing label materials have strong versatility, such as printing coated paper, PET matte silver paper, and PP synthetic paper labels.

For self-adhesive coated paper: In the case of needing extremely high clarity and wear resistance, enhancing the mixed base carbon strip is a better choice.

Second, specific selection suggestions

Select according to printing requirements

If the printing amount is not large, and the printing effect is not particularly high, you can choose wax-based carbon strips to reduce costs.

If the printing volume is large, or there are certain requirements for the printing effect, it is recommended to choose a mixed base carbon strip to obtain better printing results and wear resistance.

In the case of extremely high requirements for printing effects (such as long-term preservation, frequent friction, etc.), resin-based carbon strips should be selected.

Consider the characteristics of self-adhesive coated paper

The surface of self-adhesive coated paper is smooth, and the adhesion of carbon tape has certain requirements. Reinforced mixed base carbon strips are generally able to better meet this demand, while resin-based carbon strips provide better adhesion and wear resistance.

Refer to TSC official recommendations or consult professional suppliers

TSC officials usually recommend the appropriate carbon strip model based on the characteristics of their printers and market demand. In addition, professional carbon belt suppliers can also provide personalized advice and solutions according to the specific needs of customers.

Third, precautions

When replacing the carbon tape, ensure that it is correctly installed according to the TSC barcode printer's operation manual to avoid printing problems caused by improper installation.

Check the use of the carbon belt regularly, and replace the exhausted or damaged carbon belt in time to ensure the print quality and the normal operation of the printer.

In summary, when selecting carbon tape for TSC barcode printer printing self-adhesive coated paper, the appropriate type of carbon tape should be selected according to the printing demand, the characteristics of self-adhesive coated paper and the cost.