The shelf life of the tag coated paper is not a fixed period of time, it is affected by a variety of factors, including the quality of the paper, storage conditions, the use of the environment and whether it has been treated by special processes.
In general, the coated paper tag without special process treatment can have a relatively long shelf life under good storage conditions (such as appropriate temperature and humidity, avoid direct sunlight and humid environment). However, the specific shelf life time is not a unified standard, different manufacturers, different products may be different. Some information shows that the storage time of coated paper product labels is about 2 years, but this is only a rough reference range.
If the tag coated paper has been treated by special processes, such as punching, punching, hollowing, hot stamping, etc., these processes may have an impact on the shelf life of the paper. In particular, too much hot stamping pressure may cause the paper to deform, making the tag no longer suitable for use in a short time. In addition, if the storage conditions are poor, such as high temperature, high humidity or long periods of direct sunlight, it will also accelerate the aging process of the paper and shorten its shelf life.
Therefore, in order to extend the shelf life of tag coated paper, it is recommended to take the following measures:
1.Choose high-quality coated paper products to ensure the durability of the paper itself.
2.Store the tags in appropriate temperature and humidity conditions, away from direct sunlight and humid environment.
3.For tags treated by special processes, special attention should be paid to storage conditions to avoid irreversible damage to the paper caused by process processing.
4.Check the status of the tag regularly before use, and replace it in time if deformation, yellowing or other signs of aging are found.
It should be noted that the above information is for reference only, and the shelf life of the specific tag coated paper needs to be determined according to the actual situation and storage conditions of the product. If the merchant has a large number of tags that need to be stored for a long time, it is recommended to consult a professional manufacturer or organization for more accurate advice.