How to avoid damage to wax-based carbon strips during transportation and storage?

In order to avoid damage to wax-based carbon strips during transportation and storage, the following aspects need to be paid attention to:

First, transport environment control

1. Temperature and humidity:

The wax based carbon strip should be kept in a temperature range of -5 ° C to 45 ° C when transported, and the relative humidity should be controlled between 20% and 85%. This helps prevent the carbon belt from being damaged by extreme temperature or humidity changes.

Note that the transportation time should not be too long, generally not recommended more than one month, in order to reduce the adverse effects that may be caused by long transportation.

2. Packaging protection:

Wax-based carbon tape should use appropriate packaging materials, such as double corrugated boxes, to provide good compression resistance.

Carbon strips should be packaged separately to avoid rubbing or squeezing each other during transportation.

The filling packaging material should be loose and moderate, so that the carbon belt remains fixed during transportation to prevent damage due to shaking.

Second, storage environment control

1. Temperature and humidity:

The wax based carbon strip should be kept in a temperature range of -5 ° C to 40 ° C when stored, and the relative humidity should be controlled between 20% and 85%. Such an environment helps to maintain the stability and performance of the carbon belt.

The storage time should not be too long, generally not more than one year, to avoid long-term storage of carbon strip performance degradation.

2. Avoid direct sunlight:

Wax-based carbon strips should be stored in a dry, cool place, away from direct sunlight. Direct sunlight causes the carbon belt to heat up, accelerating the aging process.

3. Protection against dampness and squeezing:

The carbon strip should be stored in a dry environment and protected from moisture. Wet environment will cause the carbon strip moisture absorption deformation, affecting the printing effect.

It is also necessary to avoid squeezing the carbon belt during storage to prevent deformation or damage to the carbon belt.

Third, regular inspection and maintenance

During the storage process, the packaging of the carbon belt should be regularly checked whether it is intact, and the packaging should be replaced in time if it is damaged.

At the same time, check whether the temperature and humidity of the storage environment meet the requirements. If any exceptions occur, adjust them in time.

Fourth, precautions for use

Before use, ensure that the wax-based carbon strip has been properly disposed of in accordance with the correct storage and transportation requirements.

During installation and use, the guidelines and recommendations provided by the carbon belt manufacturer should be followed to ensure the best performance and printing effect of the carbon belt.

In summary, by controlling the temperature and humidity of the transportation and storage environment, using appropriate packaging protection, avoiding direct sunlight and humid environment, and regular inspection and maintenance measures, it can effectively avoid the damage of wax-based carbon strips during transportation and storage.