What is the printing temperature of the mixed base carbon strip?

The printing temperature of the mixed base carbon strip is usually between 140 ° C and 160 ° C. This range of temperature can be applied to most mixed base carbon strips, but the specific temperature also needs to be selected according to the mixed base carbon strip material used, hot stamping speed and printing variety.

The following is a further explanation of the printing temperature selection of the mixed base carbon strip:

1.Material selection: The melting point of the mixed base carbon strip will be different if the material is different. Therefore, when selecting the printing temperature, it is necessary to determine the appropriate temperature range according to the mixed base carbon strip material used.

2.Stamping speed: As the stamping speed increases, the required stamping temperature will also increase. This is because at faster hot stamping speeds, the contact time between the carbon strip and the printing medium becomes shorter, and higher temperatures are required to ensure that the toner can be fully transferred to the medium.

3.Printing varieties: Different printing varieties have different requirements for hot stamping temperatures. For example, some special label paper or plastic labels may require a higher temperature to achieve the desired printing effect.

In order to ensure the accuracy and stability of the hot stamping temperature, it is recommended to use a thermometer for monitoring and adjustment. After the thermometer is monitored to reach a certain temperature, the heat source can be stopped to heat the thermal sensitive material to reach a stable temperature, so that the hot stamping quality is more stable and reliable.

In addition, the use environment, transportation and storage conditions of the mixed base carbon belt also need attention. In general, the use of the mixed base carbon belt environment should be in the range of 5℃-35℃, 45%-85% relative humidity. During transportation and storage, adverse conditions such as high temperature, humidity and direct sunlight should be avoided to ensure the best performance of the carbon strip.

In general, the printing temperature of the mixed base carbon strip needs to be selected and adjusted according to the specific situation. In the selection and use process, it is recommended to refer to the technical specifications and guidelines provided by the carbon strip manufacturer to obtain the best printing effect and service life.