TSC 244RRO barcode printer paper abnormal, skip paper processing method

Have you ever encountered such a problem? When printing bar code, TSC 244RRO bar code printer does not run normally, skip paper, or even print position is not normal? Today we will explain in detail how to deal with these problems, so that your printing work is more smooth!

First of all, let's take a look at the printer paper is not normal problem. This can be caused by damage to the printer's sensor or dust blockage. We can first clean the inside of the printer, check whether there is dust and debris, and then check whether the sensor of the printer is intact. If you still can't solve the problem, you can try to replace the sensor of the printer or contact after-sales service for repair.

Then there's the problem of skipping paper. This problem may be caused by poor paper quality or uneven paper tension. We can try to replace high-quality paper, or adjust the paper tension to avoid the paper jumping.

Finally, if you find that the print position is not normal, it may be due to the printer's print head offset or the printer parameters are set incorrectly. We can fix this problem by repositioning the print head or resetting the printer parameters.

Here we share with you the TSC-244PRO printer does not recognize label paper, skip paper, label paper printing times the correct processing method:

1. After closing the barcode label printer, press and hold the "PAUSE (or PAUSE)" key.

2, then turn on the printer power switch, and release the "PAUSE" button after the machine produces paper.

3, the printer will automatically walk the paper, until the paper stops, and the green light on the printer is normally lit, the test paper is completed.

4, then press the "FEED" key, each press the feed key, the height of a piece of paper will be out. Stop at the same spot on each piece of paper. After stopping at the same position each time, the printer is debugged.

If the location is still different, check the paper installation.

The above is the daily use precautions of TSC 244RRO barcode printer that we have prepared for you, as well as the processing methods to solve the abnormal paper flow, skip paper and abnormal printing position of the printer. I believe these methods can make your printing work more efficient and smoother!

If you have any other questions about the printer, please leave them in the comments section and we will answer them as soon as possible! If you found this article helpful, don't forget to like it!