How to solve the problem of wrinkling of TTO high-speed coding ribbon?

To solve the problem of wrinkling of TTO high-speed coding ribbon, the following aspects can be investigated and handled:

1、 Check the installation and quality of carbon ribbon

Correctly install carbon ribbon:

Follow the user manual or installation guide of the printer to ensure the correct installation of the ribbon and avoid wrinkling caused by improper installation.

The carbon ribbon should be pushed to the bottom and installed along the correct path to ensure there is no jamming or poor routing.

Check the quality of the carbon ribbon:

Choose high-quality carbon ribbon to avoid wrinkling caused by the use of inferior carbon ribbon.

Check whether the surface of the carbon ribbon is flat, smooth, and free of impurities or bubbles.

2、 Adjust printer settings

Temperature setting:

Adjust the temperature setting of the printer according to the type of ribbon and the requirements of the printer.

Excessive temperature may cause wrinkling of the carbon ribbon, so it is advisable to choose a lower printing temperature as much as possible while meeting the printing requirements.

Pressure setting:

Adjust the pressure of the print head to ensure balanced pressure on both sides.

Use the British hexagonal tool to loosen the screws of the print head assembly and turn clockwise or counterclockwise as needed to increase or decrease pressure.

Speed setting:

Adjust the printing speed of the printer according to production needs.

High speed printing may increase the risk of carbon ribbon wrinkling, so a balance should be made based on the actual situation.

3、 Check printer components

Print head:

Regularly clean the print head to prevent dust and impurities from accumulating and affecting print quality.

Check if the print head is severely worn, and if necessary, replace it with a new one in a timely manner.

Roller:

Check if the rollers of the printer are severely worn or unbalanced.

Roller wear or imbalance may cause wrinkling of the carbon ribbon during printing, and a new roller should be replaced in this case.

Carbon ribbon control baffle:

Check if the carbon ribbon control baffle is balanced.

If the baffle is unbalanced, it can be adjusted to control the balance of the carbon ribbon and avoid wrinkling.

4、 Other precautions

Avoid frequent printing:

The printer may overheat after prolonged continuous operation, causing wrinkling of the ribbon.

If you need to print for a long time, you should rest the printer appropriately to avoid overheating.

Check label materials:

Ensure that the specifications of the label material match the requirements of the printer and ribbon.

Excessive thickness or thinness of the label material may cause wrinkling of the carbon ribbon.

Regular maintenance:

Regularly maintain the printer, including cleaning, lubricating, and checking the wear and tear of each component.

Promptly identify and address potential issues to prevent malfunctions from occurring.

In summary, solving the problem of wrinkling of TTO high-speed coding ribbon requires investigation and handling from multiple aspects such as ribbon installation and quality, printer settings, printer components, and other precautions. By reasonable setting and maintenance, the problem of carbon ribbon wrinkling can be effectively reduced, and printing quality and production efficiency can be improved.