What is the recommended printing speed for enhanced wax based carbon ribbon?

Regarding the recommended printing speed for enhancing wax based carbon ribbons, different sources may provide slightly different recommendations. But generally speaking, the recommended printing speed for enhanced wax based carbon ribbon can be adjusted within a certain range, depending on factors such as printer type, label material, and printing requirements.

On the one hand, some argue that the printing speed of enhanced wax based carbon tape on coated label paper can reach up to 12 inches (approximately 30.5 centimeters) per second. This demonstrates the excellent performance of enhanced wax based carbon ribbon in high-speed printing.

On the other hand, some opinions suggest that when using a flatbed printer, the recommended printing speed should not exceed 6 inches per second (IPS). This may be because different printers and label materials have different requirements for the printing speed of carbon ribbon.

Therefore, in order to ensure the best printing effect and label quality, it is recommended to choose the appropriate printing speed based on the printer type, label material, and specific printing requirements in practical applications. At the same time, you can also refer to the user manuals of the ribbon and printer or consult relevant technical support personnel for more accurate advice.

Overall, the recommended printing speed for enhancing wax based carbon ribbons is a relatively flexible range that needs to be adjusted according to actual conditions. When choosing a printing speed, factors such as printer performance, label material, and printing quality should be comprehensively considered to achieve the best printing effect.