How to reduce the wear of all resin carbon tape on the print head?

To reduce the wear of all resin carbon tape on the print head, you can start from many aspects, the following are some effective measures:

First, choose high-quality carbon belts

High-quality carbon tape: Choose high-quality all-resin carbon tape, which usually has better wear resistance, heat resistance and stability, and can effectively reduce wear on the print head.

Anti-static ability: choose a carbon belt with strong anti-static ability to reduce the adsorption of electrostatic dust, thereby reducing the damage of dust to the print head. You can simply measure the anti-static ability of the carbon belt by holding the back of your hand close to it.

Back coating technology: Choose a carbon strip with advanced back coating technology. The back coating prevents the transfer of toner, ink and other impurities from the back of the carbon strip to the print medium, preventing print residue and reducing direct contact between the carbon strip and the print head, thereby reducing wear.

Second, adjust the printing parameters

Reduce printing temperature and pressure: Properly reduce the temperature and pressure of the print head, which can reduce the friction and wear of the carbon strip on the print head.

Adjust the printing speed: under the premise of ensuring the print quality, the appropriate reduction of the printing speed helps to reduce the work burden of the print head and extend its service life.

Third, regular maintenance and cleaning

Clean the print head: Regularly use a special wiping stick or cotton swab dipped in a small amount of alcohol to clean the surface of the print head, remove residual toner and impurities, and keep the print head clean and smooth.

Clean the printing roller and transmission system: clean the printing roller and transmission system at the same time to ensure the smooth operation of the entire printing mechanism and reduce the print head wear caused by excessive stuck or resistance.

Regular replacement of wearing parts: according to the printing amount and print quality changes, regularly replace wearing parts such as print heads, carbon belts, etc., to avoid excessive wear and tear affecting the printing effect and life of the print head.

Fourth, improve the use of the environment

Keep the environment clean: When using the printer, try to keep the surrounding environment clean to reduce the accumulation of dust and impurities, thereby reducing their impact on the print head.

Control temperature and humidity: Maintain the appropriate temperature and humidity of the printing environment to avoid excessive or too low temperature and humidity on the print head and carbon strip.

Fifth, choose the right type of carbon belt

Low temperature resin carbon strip: Compared with traditional high temperature resin carbon strip, low temperature resin carbon strip can achieve good printing results at lower temperatures, thus reducing wear on the print head. At the same time, the low temperature resin carbon strip also has the characteristics of low printing static electricity and low noise.

In summary, by selecting high-quality carbon tape, adjusting printing parameters, regular maintenance and cleaning, improving the use environment and selecting the appropriate type of carbon tape, we can effectively reduce the wear of all resin carbon tape on the print head and extend the service life of the print head.